| |
Coe Powered Stock Straighteners-ServoMaster
|
 |
Coe heavy duty power straighteners process material at widths from 1.0” to 84.0” and thickness from .010” to .625”. Breaker roll diameter and center distance spacing provides effective coil set removal all material types and sizes.
- Heavy duty fabricated bases
- Seven (7) independent breaker rolls
- Close tolerance cluster gear drive train
- Independent height adjustment of rolls
- Entrance side pinch rolls
- Exit side pinch rolls
- AC variable speed drives
- Material edge guide systems
- Ultra-sonic loop control systems
- Peeler / threader / hold down devices
|
|
Rapid Air - Powered Straighteners
|
 Rapid-Air high-performance powered straighteners feature superior strock processessing capabilities, simple operation, and the same rugged durability Rapid-Air products are famous for. Precision coil set removal is combined with smooth payout for material over a wide range of strock widths and thicknesses. |
|
Straighteners Model Selection
| Model |
Max Material
Width |
Effective Straightening Range |
Max Speed
per min |
AC Input Power Required |
| |
| SA3 |
3” (76mm) |
.002” - .030” (.051-.76mm) |
700” (1778cm) |
1/4hp, 115vac, 1ph |
| SA3M |
3” (76mm) |
.002” - .030” (.051-.76mm) |
1,400” (3556cm) |
1/2hp, 115vac, 1ph |
| |
| SB4 |
4” (102mm) |
.003” - .050” (.076-1.27mm) |
700” (1778cm) |
1/2hp, 115vac, 1ph |
| SB4M |
4” (102mm) |
.003” - .050” (.076-1.27mm) |
1,400” (3556cm) |
1/2hp, 115vac, 1ph |
| |
| SBX4 |
4” (102mm) |
.004” - .080” (.10-2.03mm) |
825” (2100cm) |
3/4hp, 115vac, 1ph |
| SBX8 |
8” (203mm) |
.004” - .070” (.10-1.78mm) |
825” (2100cm) |
3/4hp, 115vac, 1ph |
| SBX12 |
12” (305mm) |
.004” - .060” (.10-1.52mm) |
825” (2100cm) |
3/4hp, 115vac, 1ph |
| |
| SBX4M |
4” (102mm) |
.004” - .080” (.10-2.03mm) |
1,650” (4200cm) |
1hp, 115vac, 1ph |
| SBX8M |
8” (203mm) |
.004” - .070” (.10-1.78mm) |
1,650” (4200cm) |
1hp, 115vac, 1ph |
| SBX12M |
12” (305mm) |
.004” - .060” (.10-1.52mm) |
1,650” (4200cm) |
1hp, 115vac, 1ph |
| |
| SCX6 |
6” (152mm) |
.006” - .100” (.15-2.54mm) |
825” (2100cm) |
1hp, 115vac, 1ph |
| SCX12 |
12” (305mm) |
.006” - .090” (.15-2.29mm) |
825” (2100cm) |
1hp, 115vac, 1ph |
| SCX18 |
18” (457mm) |
.006” - .080” (.15-2.03mm) |
825” (2100cm) |
1hp, 115vac, 1ph |
| SCX24 |
24” (610mm) |
.006” - .065” (.15-1.65mm) |
825” (2100cm) |
1hp, 115vac, 1ph |
| |
| SCX6M |
6” (152mm) |
.006” - .100” (.15-2.54mm) |
1,650” (4200cm) |
2hp, 230vac, 1ph |
| SCX12M |
12” (305mm) |
.006” - .090” (.15-2.29mm) |
1,650” (4200cm) |
2hp, 230vac, 1ph |
| SCX18M |
18” (457mm) |
.006” - .080” (.15-2.03mm) |
1,650” (4200cm) |
2hp, 230vac, 1ph |
| SCX24M |
24” (610mm) |
.006” - .065” (.15-1.65mm) |
1,650” (4200cm) |
2hp, 230vac, 1ph |
| |
| SCX6H |
6” (152mm) |
.006” - .080” (.15-2.03mm) |
4,100” (10400cm) |
3hp, 230vac, 1ph |
| SCX12H |
12” (305mm) |
.006” - .070” (.15-1.78mm) |
4,100” (10400cm) |
3hp, 230vac, 1ph |
| SCX18H |
18” (457mm) |
.006” - .060” (.15-1.52mm) |
4,100” (10400cm) |
3hp, 230vac, 1ph |
| SCX24H |
24” (610mm) |
.006” - .055” (.15-1.40mm) |
4,100” (10400cm) |
3hp, 230vac, 1ph |
| |
| SD6 |
6” (152mm) |
.006” - .125” (.15-3.18mm) |
825” (2100cm) |
2hp, 230vac, 1ph |
| SD12 |
12” (305mm) |
.006” - .125” (.15-3.18mm) |
825” (2100cm) |
2hp, 230vac, 1ph |
| SD18 |
18” (457mm) |
.006” - .100” (.15-2.54mm) |
825” (2100cm) |
2hp, 230vac, 1ph |
| SD24 |
24” (610mm) |
.006” - .090” (.15-2.29mm) |
825” (2100cm) |
2hp, 230vac, 1ph |
Straightening range based on low carbon steel, commercial grade.
|
|
Waddington Electronics - Precision Stock Straighteners
|
 |
Waddington precision stock straighteners feature modern design and ground components made from stress relieved steel to ensure precise alignment, allowing you to work the material beyond its yield point without imparting distortion into the strip because of machine deflection.
- 6"-48" width range
- .005" to .250" thickness range
Series Available: LC, MD & SF
|
|
Coe Space Savers - Reel/Straightener/Feeder Combination
|
 |
The SpaceMaster Compact Coil Line Series combines the three functions of unwinding, straightening, and feeding of coil stock into one machine. This compact arrangement provides optimum coil feeding efficiency with pilot release operation and saves valuable plant floor space.
Coe Press Equipment offers a variety of roll diameters and widths in this product line. Three models are available:
- Series 1 with 12", 16", 20" and 24" maximum coil widths, coil thicknesses to .125"
- Series 2 with 12", 16", 20", 24", 32", 40" and 52" maximum coil widths, coil thicknesses to .187"
- Series 3 with 16", 20", 24", 32", 40", 52", and 64" maximum coil widths, coil thicknesses to .250"
|
|
|