Honeywell LETS factory reporting software uses the latest technology to collect production data, including Overall Equipment Effectiveness (OEE), from Wintriss-equipped presses as well as virtually every other machine in your factory.

• Can talk to all machines; not just presses
• Uses your existing Ethernet (including wireless)
• Open architecture allows for communications with external software
• Displays real-time factory status in your web browser
• Reports are customizable
• Automatic report distribution
• Tracks total hits on every die

Collect Data from All of Your Machines
LETS is a state-of-the-art data collection package that is scalable and flexible.   LETS comes factory-configured to talk to Wintriss SmartPAC 1 & 2, however its OPC Server back-end features a wide range of available "Plug-in" device drivers and components for the industrial market.   This allows us to modify LETS to communicate with virtually every machine in your shop.

LazerSafe is a guarding system for hydraulic press brakes that provides a highly effective solution for both operator safety and machine productivity. Operators are protected by two continuous bands of laser light that sense the zone below the punch. LazerSafe allows machines to safely operate at higher speeds, increasing productivity

• Delivers comprehensive operator protection at close proximity to the workpiece.
• Allows tools to close at high speed, increasing productivity.
• Complex shapes can be achieved with the "Tray/ Box" and "Field Muted" modes of operation.
• Encoder feedback provides closed-loop monitoring of speed and stopping distance of the ram.
• Two flat bands of continuous laser light detect obstructions as small as 0.0160" (4 mm) while remaining vibration tolerant.
• The mute point is automatically determined, easily set and continuously monitored.
• The rear section of laser band is easily muted to ignore back gauge in "up-close" situations.
• Failure detection is performed by real-time monitoring of the process under control.