Pre-Pressurized Lubrication Systems

The Pax Lube Systems are "pre-pressurized". The lubricant is supplied to the manifold under pressure. A constant and consistent supply of lubricant is provided. As long as there is a supply of lubricant in the reservoir, there will always be lubricant available at the distribution pumps. It also means that the distribution pumps work more efficiently because no priming is required.

Features:

• Pre-Pressurized System
• Air Driven Diaphragm Pump with Filter
• Stainless Steel Tank
• Ergonomically Designed Back Panel
• 5, 15, or 30 Gallon System
• Up to 14 Stainless Steel Distribution Pumps
• Tested for Over 100,000,000 Cycles

The Pax conveyor is specifically designed for on-bolster, under-die part and scrap removal. The "low-profile" design enables it to fit where many conveyors will not. Designed by our own tool & die craftsmen, the conveyor is built to survive the rough metal stamping environment.

Features:

• Easy Installation - Quick Setup
• 2 1/2" Clearance Needed
• Low-Profile
• Rugged Woven Polyester PVC Belt
• Quick Belt Change
• Flared Tray Sides
• Standard 115 VAC Electrical Connection
  

Are you concerned with the overall safety aspect of your press room? Are you having problems with containing and controlling die lubricant around your press? Then consider PAX Die Doors as a part of the solution. Like other PAX products, the PAX Die Door was developed by our own stamping company. The doors are also designed to satisfy many aspects of press room efficiency...

Features:

• Press Operators ~ simple to operate, lightweight doors made for easy opening and closing.
• Die Maintenance & Set-up ~ doors install close to the press to allow personnel easy access for maintenance and set-up of dies.
• Facility Maintenance ~ doors have no lubrication requirements and are designed to be easily removed in the event that the press requires repair or maintenance.
• Company ~ doors are designed for quick and simple installation. They also assist in controlling die lubricants and provide a point-of-operation barrier.