NEW! - Expand the functionality of the SmartPAC 2 / WPC 2000 integration with the Option 2 Expansion Module.

The WPC 2000 Clutch/Brake Control is an easy-to-use, dual microprocessor based system that controls a part revolution clutch mechanical power press. With its two independent microprocessor systems, the WPC 2000 provides diverse redundancy, the best technology in maintaining optimum clutch/ brake control and greater operator safety.

Meets or exceeds all ANSI B11.1-1998 and OSHA 1910.217 regulations, including Control Reliability.

• Interrupted stroke provision significantly improves pressroom productivity
• Internal brake monitor checks press-stopping performance
• Customized status codes installed by user Micro-inch capability improves set-up
• Self-diagnostics identifies control problems
• Can be integrated with SmartPAC® 1 or 2 for greater ease of use
• Optional Shadow®-light curtain provides point-of-operation guarding
• Optional Foot Switch, One-Hand Control, External Trip, Continuous-on-Demand and Bar Modes for maximum flexibility
• Optional Auxiliary E-Stop Relay Outputs for stopping or preventing from starting up to three auxiliary devices like a feed or a transfer if any e-stop button is pressed, any light curtain is interrupted or any cross-checked input is open.

Screen Shots :

Back To Top

Wintriss can custom build a press-control console or panel tailored to your needs. Your integrated control system can combine any of the following: Wintriss Clutch/Brake Control Meets all OSHA and ANSI standards Dual microprocessor control Self-diagnostics Two-hand, one-hand operation (only with Shadow® light curtains) Micro-inch Graphic crank angle display Motor-control options Forward and reversing starter Variable speed drives Self-diagnostics Fused disconnects Control transformer NEMA or IEC components

Back To Top

The Latest Safety Light Curtain From the Press-Guarding Experts Wintriss has been building the Shadow light curtains for the toughest applications for more than 30 years. Our light curtains withstand the rigors of the pressroom, including severe shock, mechanical abuse, and lubricant spray. With more than 40,000 systems installed, the Shadow has a proven track record.

Connect up to Four Pairs of Heads to One Control
Shadow VII’s unique design enables you to protect multiple sides of a machine using a single control, one pair of cables, and up to 4 pairs of light curtains in series.   You can protect both the front and back of your equipment as well as provide horizontal pass-through detection.   Even a large machine can be guarded with up to 96” of protected zone to a single control providing an economical solution and minimizing installation time (for either the transmitter or receiver, the total length of the heads and interconnect cabling cannot exceed 50 feet).

Shadow VII Features:

• 4 pairs of heads connect in series to a control with only 2 cables
• Rugged extruded heads - only 1.4" x 2", in lengths from 6" to 59"
• Programmable fixed, and 1 or 2 beam floating blanking windows
• Type 4 CE approval, CSA, & U/L
• Diagnostics display
• Easy to align w/individual beam indicators
• 2 cross-checked captive contact stop relay outputs
• 2-year warranty, 48-hour service turnaround

Back To Top

Monitors press stopping performance
The Wintriss Brake Monitor is important to the safe application of machine guards such as safety light curtains. It warns the user when stopping time exceeds safe limits.

• Meets ANSI B11.1-2001 control reliability requirements
• Real-time stop-time monitor
• Digital readout for SPM, crank angle, stopping angle, stopping time or limit
• 90° stop-time test
• Brake warning indicator
• Crank angle clock
  

Back To Top