| |
W-Technologies Shock Dampers
|
 |
W-Technologies, Inc. fabricates standard hydraulic shock dampers designed to eliminate the destructive effects of reverse loading.
- Dramatic reduction in noise and vibration
- Enhanced tooling life (3 to 5 times)
- Reduced mechanical and hydraulic press failures
- Extends mechanical or hydraulic press life
- Allows for off center loading
- Allows presses to increase blanking tonnage capacity to 95% of press capacity
- Increases production speed
|
|
|
 Dur-A-Lite 600 Series Heavy Duty Industrial Grade Lights are the lights to choose when bright, compact machine light is needed. Ranging from 20” to 33” in length, these dual-tube lights are bright and include full length aluminum backbone.
Corded lights come standard with 25’ cord and molded plug. Models without cord are available with electronic ballast in the lighthead or with loose ballast that can be remote mounted. All mounted series models are standard without switch (apply power to unit, light comes on) however, an inline on-off switch is available.
A variety of mounting options are available such as magnetic mount, machine bracket mount, or direct mount.
FEATURES
- Lengths from 17" to 33"
- Wattages available: 24, 36 and 50
- O-Ring sealed to protect internal components from moisture
- Choice of outer tube (see bellow)
- Available with ballast within light fixture or loose for remote mounting
- Lights are Anti-Strobe for use in turning applications such as lathes
- 12, 24 and 230 volt models available upon request
- Corded models come standard with 25 ft. of 16/3 SJTOW oil resistant cord
- Full length aluminum backbone for extra structural rigidity
|
|
Shock, vibration, and leveling mounts
|
 Vibro/Dynamics Products are designed to effectively reduce transmitted shock and vibration and provide an adjustment means to precisely level, align, and optimally support industrial machinery. Vibro mounts provide two-way vibration isolation protection. Not only do they protect precision machinery from a severe vibration environment; they also protect your people and workplace environment from machines that generate high levels of shock and vibration. Typical applications include metal stamping presses, forging hammers and presses, and plastic, metal container, textile, and woodworking equipment weighing from 50 to 2.2 million kg.
|
|
 Features
- Precision Setting of Cam Angle/Duration
- Standard Cam Settings from 4 - 356 Degrees
- Speeds to 500 RPM (SPM) in either Direction
- Rugged UL / CSA listed Snap
- Single and double shaft models
- Chain break detection
- 4,6,8, and 12 circuit models
Also see our programmable limit switches
|
|
 Trumpf nibblers – the ideal tool to cut a clean leading/trailing edge of coil stock so it can be properly fed into a progressive die.
Various electric and pneumatic models available to cut mcrs up to 10 mm thick.
|
|
|