|
Wintriss ProPAC in-die measurement system is designed to work with any existing Wintriss SmartPAC system.
 ProPAC allows you to make in die part measurements, which provides real time process and quality control. The system will handle a variety of analog sensors, including: LVDT Gage Head, Inductive Analog Proximity, Pressure, LVDT, Current and Temperature. Control limits can be set as high, low, set manual or set automatically with user defined percentages. All limits are stored via tool number.
Typical ProPAC configuration showing ProPAC with enclosure and HD19 connector. ProPAC connects to HDP die mounted sensor connection using an HD19 cable.
Actual parts dimensions can be monitored and displayed. Set up to 8 different parameters (optional 16) including:
- Angle and part height
- Draw depth Material thickness
- Feed length Temperature
- Nitrogen & lube pressure
- Electric current
- Press bearing temperature **
- Main motor load current
- Die shut height
ProPAC also allows you to:
- Divert out of limit parts to scrap
- Stop the press if too many bad parts are made
- Monitor conventional die protection events using typical on/off sensors with NPN or PNP outputs
- Interface with external devices
Other parameters are available. Sensors are connected through a die plug with each die, allowing for quick set up times. The sensor inputs are then processed through the ProPAC Sensor Interface (PSI) similar to the DiPro Sensor Interface (DSI).
** Bearing temperature monitoring requires that thermocouple sensors be mounted close to the heat source. Each sensor will require additional signal conditioning. The signal conditioner will provide the proper input to ProPAC. In order for ProPAC to display temperature in actual degrees a calibration process is required. This involves measuring the temperature at the sensor location during normal operation.
ProPAC Specifications
| Equipment: |
System enclosure - 10.8" x 12.5" x 4" (27.3 x 31.8 x 10.2 cm) NEMA 12, shock mounted |
| Power: |
Input - 120/240 VAC (switch selectable), 50/60 Hz, 60 VA |
| Inputs: |
8 or 16 analog sensors/ -10 to 10 Vdc max., also NPN/PNP |
| Resolution: |
1 part in 16,384 over -10 to 10 volt range |
| Stop Circuits: |
2 stop relays - rating 5A @ 120/240 VAC (N/O, held closed) |
| Opt. Relay Outputs: |
1 relay output controlled individually by each input |
| Analog Outputs: |
2 analog outputs, associated with inputs 1 & 2 control external devices, such as servo motors |
| Operator Interface: |
Through SmartPAC Press Control |
| Display: |
SmartPAC screen - 4.88" x 3.69" (12.4 X 9.4 cm) 20 line x 40 character backlit LCD |
| Sensor Power: |
15 Vdc @ 400 mA, -15 Vdc @ 200 mA
Optional connections for external power supply |
| Control Limits: |
Types - High and low, set manually or automatically with user defined percentages - all limits stored with tool numbers |
| Display: |
Individual display for each sensor |
SmartPAC/ProPAC typical screen images
|