Production Resources Incorporated Logo (White)
Search...

Servo Feeds

Servo Roll Feeds – Electric Press Feeds

Production Resources offers a complete line of reliable, flexible servo feeds for all your coil processing applications.


Colt Automation Heavy Duty Servo Driven Roll Feeds

Our Colt Automation Press Equipment servo driven roll feeds process widths from 2” through 84”. Material thickness ranging from .002” to .625” can also be processed.

Adjustable passline press mounted and cabinet mounted models available. Typically Colt servo feeds require a free loop from a powered straightener or reel; however, models with pull through straighteners are available (see loop concepts in our technical resources section).

Colt Servo Roll Feeders – All built with:

  • 2 or 4 roll design
  • For speeds to 500 FPM
  • 52100 Aviation bearing quality roll material (Rockwell 60/64)
  • Back-up roll support from single to quadruple backup rolls to limit deflection when running narrow or AHSS material
  • With Advanced 2 Generation Servo Drive Feed accuracy to .001”
  • Optional end of stock sensors, batching & gagging, full press control integration
  • Optional pull through Straighteners
  • Traversing options to accommodate stackers, robots etc.
  • Also available as a Feeder with a Pull Through Straightener (PTS)

Colt automation feeder
Colt automation feeder

 

Waddington Direct Drive High Speed Servo Feeds

Feeds with drive gearboxes have backlash, but direct drive feeds perform reliably for billions of cycles with no change in accuracy or repeatability.

  • Very accurate: +-.0005
  • Very Fast: up to 400 spm for many applications with high speed pilot release as an option.
  • Direct load connection eliminates maintenance of gearboxes, belts, or pulleys
    Reduced number of components – no belts and pulleys.
  • Gearing between rolls run in oil with full thickness range useable without any adjustments.
  • Gears remain fully engaged through the entire feed thickness range.
  • New controls feature touch screen user interface.

Specifications:

  • Maximum Stock Width: 3 to 25 inches
  • Maximum Stock Thickness: .125 inches
  • Minimum Feed Length: .000 inches
  • Maximum Feed Length: 1200.0000 inches
  • Standard Accuracy: +/-.0005 inches
  • Power Supply (see options):  230V or 460V 1 and 3ph 60hz

Waddington Twin Strip Servo Feed

Waddington high speed, high accuracy, and special application servo feeds. Models for stock widths from 1” to 48” and thickness from .002” to .250”.

Waddington twin strip servo feed
Waddington twin strip servo feed

Specialty feeds for:

  • Twin strip feeds
  • Push/Pull configurations
  • Thin, hard-to-handle materials
  • Wire feeds
  • Complex gag operations

Features include:

  • High speed feeding to 1200 spm
  • Accuracies of ± .0005”
  • High speed air pilot release to 300 spm – servo pilot release to 1200 spm
  • Programming is easy and menu driven
  • System can be interfaced with other computers
  • Fast, easy, and accurate length control
  • Locatable on any side of the press in push or pull configurations
  • Available with a variety of set-up storage options

Press Room Equipment Affordable Servo Feed

Providing flexibility, reliability and affordability all in one machine.

 

Pre servo feeder
Pre servo feeder

Features include:

  • 25 Standard Models to choose from.
  • Stock Thickness Capacity to .375 in.
  • Stock Widths up to 72 in.
  • Helical Gear Driven Rolls
  • Non-Stretch Kevlar Belt.
  • Available in 3.25”, 4.50”, or 5.50” roll diameters.
  • Pull-Thru Straighteners available.

Rapid-Air Light & Medium Duty Compact Affordable Servo Feeds

Rapidair servo feeder
Rapidair servo feeder
  • Rapid-Air servo feeds are best suited to 2” wide to 18” wide materials from .004” to .125” thick.
  • These are affordable, accurate, reliable feeds with short delivery times.
  • Innovative, new manufacturing techniques bring you the highest quality, low maintenance, cost-effective servo feeds.
  • Fast job changeover
  • Compact and simple to install
  • High production rates
  • Quick delivery
  • Controls compatible with most press automation controls

RapidAir Servo Feeds Model Selection

MiniServo Series

Model
Max Material Width
Max Thickness Capacity at Full Width
Max Feed Roll Opening
Standard Roll Type
AC Input Power
MS2
2 in. (51mm)
.040 in. (1.02mm)
.060 in. (1.52mm)
Hardened & Ground Standard
115V, 1ph, 60 hz
MS4
4 in. (102mm)
.040 in. (1.02mm)
.060 in. (1.52mm)
Hardened & Ground Standard
115V, 1ph, 60 hz
MS8
8 in. (203mm)
.031 in. (.79mm)
.060 in. (1.52mm)
Hardened & Ground Standard
115V, 1ph, 60 hz

100D Series

Model
Max Material Width
Max Thickness Capacity at Full Width
Max Feed Roll Opening
Standard Roll Type
AC Input Power
106D
6 in. (152mm)
.085in. (2.15mm)
.150 in. (3.81mm)
Hardened & Ground Standard
115V, 1ph, 60 hz
112D
12 in. (305mm)
.060 in. (1.52mm)
.150 in. (3.81mm)
Hardened & Ground Standard
115V, 1ph, 60 hz
118D
18 in. (457mm)
.045in. (1.14mm)
.150 in. (3.81mm)
Hardened & Ground Standard
115V, 1ph, 60 hz
Standard 100T Series
Model
Max Material Width
Max Thickness Capacity at Full Width
Max Feed Roll Opening
Standard Roll Type
AC Input Power
106T
6 in. (152mm)
.105 in. (2.66mm)
.150 in. (3.81mm)
Hardened & Ground Standard
230V, 3ph, 60hz
112T
12 in. (305mm)
.080 in. (2.03mm)
.150 in. (3.81mm)
Hardened & Ground Standard
230V, 3ph, 60hz
118T
18 in. (457mm)
.065in. (1.65mm)
.150 in. (3.81mm)
Hardened & Ground Standard
230V, 3ph, 60hz

Standard 200T Series

Model
Max Material Width
Max Thickness Capacity at Full Width
Max Feed Roll Opening
Standard Roll Type
AC Input Power
208T
8 in. (203mm)
.105 in. (2.66mm)
.180 in. (4.57mm)
Hardened & Ground Standard
230V, 3ph, 60hz
212T
12 in. (305mm)
.095 in. (2.41mm)
.180 in. (4.57mm)
Hardened & Ground Standard
230V, 3ph, 60hz
218T
18 in. (457mm)
.085 in. (2.15mm)
.180 in. (4.57mm)
Hardened & Ground Standard
230V, 3ph, 60hz
224T
24 in. (610mm)
.075 in. (1.91mm)
.180 in. (4.57mm)
Hardened & Ground Standard
230V, 3ph, 60hz

Heavy Duty 200TX Series

Model
Max Material Width
Max Thickness Capacity at Full Width
Max Feed Roll Opening
Standard Roll Type
AC Input Power
208TX
8 in. (203mm)
.125 in. (3.18mm)
.180 in. (4.57mm)
Hardened & Ground Standard
230V, 3ph, 60hz
212TX
12 in. (305mm)
.125 in. (3.18mm)
.180 in. (4.57mm)
Hardened & Ground Standard
230V, 3ph, 60hz
218TX
18 in. (457mm)
.100 in. (2.54mm)
.180 in. (4.57mm)
Hardened & Ground Standard
230V, 3ph, 60hz
224TX
24 in. (610mm)
.100 in. (2.54mm)
.180 in. (4.57mm)
Hardened & Ground Standard
230V, 3ph, 60hz

 

Pdf icon  Download the RapidAir Catalog

Web page icon  Click Here for Air Feeds

 

You may also be interested in:

© 2004-2024

Production Resources Incorporated.  All Rights Reserved.
linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram