Production Resources Summer 2020 News
Other models available for quick shipment. Call or email Chris Jones to get a quote on a press to suit your exact needs. 615-714-1000 or sea-jay@pri-mailbox.com
New Wintriss Sensors
 |
 |
|
| Distance-Settable Reflective Sensor – Visible Light, 20 to 80 mm Sensing Distance – For detecting parts near a background | Proximity Sensor for Non Ferrous Metals – Flat Package, 3 mm Range – Sensor Head Only | |
| $195.00 | $180.00 |
50 Tips for Better Die Protection
Tip #10 listed below as an example
Half feed for high speed
If the feed cycle is long enough, or the press runs fast enough, full feed won’t occur until after the critical angle.
If this happens, your full feed sensor needs to top stop the press to avoid sticking it on bottom.
Die damage can result…. But… Don’t stop there.
Install a sensor to detect the strip half way through the progression (or early enough to E-stop).
Dorner Retractable Tail Conveyor
A retractable conveyor, or retracting tail, is a conveyor frame with the ability to retract or extend, typically on slides or rails. The capability to retract, either manually or pneumatically, can improve system flexibility by adding functionality into your conveyor. There are a variety of applications for retractable conveyor tails.
Some of the major uses include:
- Reject for contaminated or rejected products
- Depositing products onto another conveyor or tray. This can be done in a precise, exact layout or simply dropping product.
- Product Routing into multiple lines.
- Walk-Through applications where you need quick and easy access to the other side of the line or access to equipment. Depending on your application, the retracting function can happen infrequently with low accuracy or it can reoccur every few seconds with precision.
Retractable tail YouTube video
Need Pressroom Equipment? Call us
Accra Wire – pallet decoilers
Coe Press Equipment Corp. – coil feeding and handling
Dorner – low profile conveyors
Green Valley – die carts & die racks
Linear Transfer Automation – transfer and destacking
MPI – electric shaker conveyors
Pascal – quick die change
Pax Products – conveyors and lubrication systems
Rapid Air – coil feeding and handling
Seyi Press – servo and conventional power presses
Wintriss Controls – automation and safety controls
Call Chris Jones 615-714-1000 or email sea-jay@pri-mailbox.com for:
In plant application assistance, OSHA/ANSI compliance surveys, and Quotes.
PRODUCTION RESOURCES, INC.
256 Seaboard Ln
STE B-104
Franklin, TN 37067