Overview
COE FeedMaster conventional coil feed lines are built to handle a wide range of material types, thicknesses, yield strengths, widths and coil weights. COE matches its coil reels, power straighteners and servo roll feeds into complete lines, with options for progressive die feeding or blanking. Across the line, COE lists coil widths from 1" to 78", thickness from .010" to .725", coil weights up to 60,000 lb, yield strengths of 10–300 KSI, speeds from 70 to 250 FPM and footprints typically 10' to 100' long. PRI represents COE Press Equipment in Alabama and Georgia.
Key Features
- Wide processing range
- Coil widths from 1" to 78" and coil weights up to 60,000 lb across the line.
- Progressive die or blanking
- Optional features configure a line for progressive die feeding or blanking.
- PLC controls
- COE's PLC controls package is designed to be user-friendly and reduce time to launch. Advanced PLC controls add simulation, automated setup and dynamic compensation.
- Set-up and changeover
- COE line controls are built for set-up and changeover efficiency across uncoiling, straightening and feeding.
- Matched components
- COE reels, power straighteners and servo roll feeds are matched for full system capability.
- AHSS capable
- COE designs AHSS capability into all of its power straighteners.
Product Line / Models
Conventional lines, plus the multi-mode MultiMaster for coil or blanks:
- FeedMaster Series – Conventional coil feed lines. Widths 1"–78", thickness .010"–.725", coil weights up to 60,000 lb and 70–250 FPM across the line.
- MultiMaster Series – Multi-mode press feed lines that run either coil or blanks from the same system. Offered as conventional or compact lines, or as advanced systems that add an oscillating shear press and blank destackers. Same ranges across the line, with footprints of 10' to 100'+.
- SyncMaster integrated controls – Designed to provide the functionality typically found in a fully customized coil feed line control system.
- Advanced PLC controls – Multiple features to reduce the time needed to commission a new line.
Applications & Benefits
- Progressive die feeding: Conventional lines can be configured for progressive dies.
- Blanking: Options configure a line for blanking.
- Transfer presses: MultiMaster lines feed coil or blanks from one system. COE says this can lower material handling and reduce cycle times.
- Mixed materials: AHSS, cold-rolled and hot-rolled steel, galvanized, stainless, pre-painted and aluminum.
How to Choose the Right COE Conventional Line
- Material type and yield strength.
- Thickness range and coil width range.
- Coil weight, OD and ID.
- Feed length (progression), strokes per minute and line speed.
- Press type (progressive, blanking or transfer), pass line height, and whether the die uses pilots.
- Whether you need to feed coil only, or coil and blanks (MultiMaster).
- Floor space available. Conventional lines typically run 10' to 100' long.
Why COE Conventional Lines Are Trusted
- Engineered to the material: Before equipment is finalized, COE runs customer data through its "Science behind the Solution" engineering calculators to confirm the line can contain, thread, straighten and feed the specified materials.
- Modular design: COE machines use modular designs that are easy to maintain and to upgrade as needs change.
- Built in-house: COE, based in Sterling Heights, Michigan, manufactures most everything in-house.
Contact & Ordering
Need help picking the right model or getting a quote? Provide these details:
- Material type and yield or tensile strength
- Thickness range and width range
- Coil weight, OD and ID
- Feed length (progression) and strokes per minute
- Press make, type and pass line height
- Floor space available, and coil-only or coil-and-blank feeding
- Contact PRI to discuss specs, lead times, and installation support.