Overview
COE cut-to-length (CTL) lines uncoil, straighten, shear to length and stack sheet metal blanks. COE configures each line from its standard feeds, straighteners and reels, plus COE shears and stackers, sized to the application. An in-house CTL line lets a fabricator, OEM or stamper run blanks in the sizes needed, when they are needed. Across the line, COE lists coil widths from 1" to 78", thickness from .010" to .725", coil weights up to 60,000 lb, yield strengths of 10–300 KSI, speeds from 70 to 250 FPM and footprints of 10' to 100'+. PRI represents COE Press Equipment in Alabama and Georgia.
Key Features
- Complete blanking line
- Reel, straightener, feed, shear and stacker integrated into one line.
- Servo shears
- COE's oscillating servo shear runs up to 240 SPM in continuous mode and cuts rectangular or trapezoidal blanks up to .25" thick.
- Angled cuts
- Optional oscillating shear heads cut varying angles on a single sheet, up to 45°.
- Stacking choices
- Drop, finger drop, finger/magnetic combination and magnetic blank stackers.
- Light to heavy gauge
- COE develops CTL lines for light-gauge through heavy-gauge applications.
- Blanking in-house
- Blanking to size optimizes material use, reduces work-in-process, and makes material defects easier to detect and contain.
Product Line / Models
COE lists these CTL lines and components:
- SpaceMaster Compact CTL (new, August 2026) – Motorized paddle-loop reel, nine-roll servo feeder/straightener (up to 120 FPM), servo shear (up to 30 strokes per minute) and scissor-lift stacker. For mild steel, non-cosmetic blanks 6"–48" wide and 12"–96" long, with stacks up to 10,000 lb and 12" high.
- Oscillating servo shear – Up to 240 SPM in continuous mode. Rectangular or trapezoidal blanks up to .25" thick. COE designed it to reduce maintenance time compared with a hydraulic shear, with energy savings and lower noise.
- Hydraulic production shear – Up to 35 SPM. Single or dual head cylinders, single-rake or bow-tie blades.
- Mechanical servo shear – Up to 70 SPM. Eccentric drive, single-rake or bow-tie blades, shimmed or adjustable blade gap.
- Oscillating shear die and shear press – Die: up to 70 SPM, oscillates up to 45°, with a magnetic exit conveyor. Press: up to 35 SPM hydraulic or 65 SPM mechanical, straight-cut and scallop-cut blanks, automatic die change available.
- Blank stackers – Drop stackers (air float assist for light gauge), finger drop stackers for commercial-size blanks, finger/magnetic stackers for wide light-gauge blanks, and magnetic stackers with programmable magnets.
Applications & Benefits
- Fabricators and OEMs buying blanks: Bring blanking in-house and control inventory and production schedules.
- Compact, non-cosmetic blanking: The SpaceMaster Compact CTL suits HVAC parts, structural components, general fabricated products and mild steel blanks where minor surface marking is acceptable.
- Trapezoid and angled blanks: Oscillating shears cut trapezoidal or angled blanks from coil.
- Press lines: COE shears can be built into blanking and transfer press line systems.
How to Choose the Right COE CTL Line
- Material type, yield strength, and whether the blanks are cosmetic.
- Thickness range and coil width range.
- Coil weight, OD and ID.
- Blank sizes and shapes: width, length, and rectangular, trapezoid or scallop cuts.
- Output needed, in blanks per minute or line speed.
- Stack weight and height, and how finished stacks are unloaded.
- Floor space available. Footprint depends on material type, thickness and yield strength.
Why COE CTL Lines Are Trusted
- Built from standard components: COE CTL lines are built from COE's standard feeds, straighteners and reels, with COE shears and stackers.
- Shear and blanking background: COE's former Sesco product line, now part of the COE brand, focused on CTL lines, blanking lines and oscillating shear dies and presses.
- Engineered to the material: Before equipment is finalized, COE runs customer data through its "Science behind the Solution" engineering calculators to confirm the line can contain, thread, straighten and feed the specified materials.
Contact & Ordering
Need help picking the right model or getting a quote? Provide these details:
- Material type, yield or tensile strength, and surface requirements
- Thickness range and coil width range
- Coil weight, OD and ID
- Blank widths, lengths and shapes
- Required output and stack size
- Floor space available
- Contact PRI to discuss specs, lead times, and installation support.