All of the features of Model 711, with the added strength of a dual strand.

• Widths: 6″, 8″, 10″ and 12″
• Curves: 30°, 45°, and 60°
• Lengths: Up to 20′
• Standard Speed: 20 FPM
• Standard Motor: 1/2 HP 230/460/3/60 TEFC
• Standard Drive: Top Mount, Right Side
• Frame: 8-5/8″ Deep x 12 Gauge
• Bearings: Grease Sealed
• Sprockets: 12 Tooth, 3.854″ Pitch Diameter
• Belt: 2″ Pitch with Replaceable 1-1/2″ High UHMW Drag Flights on 12″ Centers; Single-Strand Chain Design (Model 711) Dual-Strand Chain Design (Mode 712)

Used to convey very fine metal or parts with sharp edges that may get caught in the belting of a hinged steel belt.

• Widths: 6″, 8″, 10″ and 12″
• Curves: 30°, 45°, and 60°
• Lengths: Up to 20′
• Standard Speed: 20 FPM
• Standard Motor: 1/2 HP 230/460/3/60 TEFC
• Standard Drive: Top Mount, Right Side
• Frame: 8-5/8″ Deep x 12 Gauge
• Bearings: Grease Sealed
• Sprockets: 12 Tooth, 3.854″ Pitch Diameter
• Belt: 2″ Pitch with Replaceable 1-1/2″ High UHMW Drag Flights on 12″ Centers; Single-Strand Chain Design (Model 711) Dual-Strand Chain Design (Mode 712)

Convey very fine metal or parts with sharp edges that may get caught in the belting of a hinged steel belt. Horizontal, L, and Z frame configurations available.

Standard Specifications

• Widths: 6″, 8″, 10″, 12″, 14″, 16″ and 18″
• Curves: 30°, 45°, 60° and 75°
• Lengths: Up to 20′
• Standard Speed: 24, 36, 48, 60 FPM
• Standard Motor: 1/2 HP 230/460/3/60 TEFC
• Drive: Shaft Mount, Right Side
• Frame: 6-5/8″ Deep x 12 Gauge
• Bearings: Grease Sealed
• Sprockets: 60B 13 x 1-3/16″, Keyed in Line at Discharge; 60A 13 x 1-3/4″, with Press in Bearings
• Deck: 12 Gauge Stainless Steel Precision Roller Hi-Radius Deck. Our unique long radius self-cleaning discharge head insures dependable product discharge.
• Magnets: Enclosed with Stainless Steel; Charged Ceramic or Charged Neodymium
• Magnet Centers: 12″ Centers are Standard, but vary by application
• Chain / Tracks: #60 Roller Chain Mounted to UHMW
• Access Panels: Access panels provide quick and easy access for inspections or service

Industrial, heavy-duty conveyor with a variety of drive and height configurations designed to handle large item loads up to 2,000 pounds per lineal foot of conveyor.

Standard Specifications

• Effective Widths: 12″, 18″, 24″, 30″, 36″, 42″, 48″, 54″ and 60″; (Custom Widths Available)
• Lengths: 5’– 50′
• Standard Speed: 30 FPM
• Standard Motor: 1-1/2 HP 230/460/3/60 TEFC
• Standard Drive: Bottom Mount Center, Right Side
• Frame: 8-1/2″ Deep x Formed 1/4″ Steel
• Bearings: Grease Sealed
• Roller Chain: #60 Roll-to-Roll, Progressive Drive Roller Chain
• Standard Rollers: 3-1/2″ Dia., 300 Wall with 1-1/16″ Hex Shaft
• Roller Centers: 6″, 9″, 12″, 15″
• Standard Supports: 30″ Top of Roller

The Model 670 is built to convey weights up to 1,000 pounds per lineal foot of conveyor.  Excelling in moving heavy industrial items quickly.

Standard Specifications

• Effective Widths: 12″, 18″, 24″, 30″, 36″, 42″, 48″ (Custom Widths Available)
• Lengths: 5’– 50′
• Standard Speed: 30 FPM
• Standard Motor: 3/4 HP 230/460/3/60 TEFC
• Standard Drive: Bottom Mount Center, Right Side
• Frame: 6.5″ Deep x Formed 7 Gauge
• Bearings: Grease Sealed
• Roller Chain: #60 or #80 as required
• Standard Roller Choices:
• 2-1/2″ Dia x 11 Ga. with 11/16″ Hex Shaft
• 2-5/8″ Dia. x 7 Ga. with 11/16″ Hex Shaft
• Roller Centers: 6″, 9″, 12″, 15″
• Standard Supports: 30″ Top of Roller

Choose this curve unit for product lines requiring a 90-degree turn. This unit uses V-belt driven live roller spurs to merge product lines.

Standard Specifications

• Widths: 12″, 18″, 24″, 30″, 36″
• 30 Degree: (Model 630 Straight Rollers) (Model 631 Tapered and Straight Rollers)
• 45 Degree: (Model 645 Straight Rollers) (Model 645 Tapered and Straight Rollers)
• 90 Degree: (Model 690 Straight Rollers) (Model 690 Tapered and Straight Rollers)
• Standard Motor: 1/2 HP 230/460/3/60 TEFC
• Standard Speed: 60 FPM
• Standard Drive: Bottom Mount
• Frame: 6-1/2″ Deep x 12 Gauge
• Rollers: 2″ Diameter x 16 Ga with 7/16″ Hex Shaft
• Roller Centers: 2-5/8″ Inside Rail (from V-Belt Driven Curves)

Use this curve unit to make a 45-degree turn. V-belt driven live roller spurs are used to merge product lines.

Standard Specifications

• Widths: 12″, 18″, 24″, 30″, 36″
• 30 Degree: (Model 630 Straight Rollers) (Model 631 Tapered and Straight Rollers)
• 45 Degree: (Model 645 Straight Rollers) (Model 645 Tapered and Straight Rollers)
• 90 Degree: (Model 690 Straight Rollers) (Model 690 Tapered and Straight Rollers)
• Standard Motor: 1/2 HP 230/460/3/60 TEFC
• Standard Speed: 60 FPM
• Standard Drive: Bottom Mount
• Frame: 6-1/2″ Deep x 12 Gauge
• Rollers: 2″ Diameter x 16 Ga with 7/16″ Hex Shaft
• Roller Centers: 2-5/8″ Inside Rail (from V-Belt Driven Curves)

Use this curve unit to make a 30-degree turn. V-belt driven live roller spurs are used to merge product lines.

Standard Specifications

• Widths: 12″, 18″, 24″, 30″, 36″
• 30 Degree: (Model 630 Straight Rollers) (Model 631 Tapered and Straight Rollers)
• 45 Degree: (Model 645 Straight Rollers) (Model 645 Tapered and Straight Rollers)
• 90 Degree: (Model 690 Straight Rollers) (Model 690 Tapered and Straight Rollers)
• Standard Motor: 1/2 HP 230/460/3/60 TEFC
• Standard Speed: 60 FPM
• Standard Drive: Bottom Mount
• Frame: 6-1/2″ Deep x 12 Gauge
• Rollers: 2″ Diameter x 16 Ga with 7/16″ Hex Shaft
• Roller Centers: 2-5/8″ Inside Rail (from V-Belt Driven Curves)

Designed for applications where dwell stations or safe accumulation of product is needed, this conveyor allows a changeable combination of totally free moving and controlled-accumulation sections.

Standard Specifications

• Back-to-Back Widths: Up to 36″
• Lengths: Up to 100′
• Standard Speed: 60 FPM
• Standard Motor: 1/2 HP 230/460/3/60 TEFC
• Standard Drive: Bottom Mount at Infeed, Left Side
• Standard Belt: Black PVC 120, Clipper Lacing
• Drive Pulley: 8″ Dia Crown Face Rubber Lagged x 1-7/16″
• Tail Pulley: 4″ Dia Crown Face Take Up x 1-3/16″
• Frame: 6-1/2″ Deep x 12 Gauge
• Bearings: Grease Sealed
• Standard Rollers: 2″ Diameter on 6″ Centers
• Standard Supports: 30″ Top of Roller

This unit is designed to horizontally move large large cartons, drums, and tires for use where transfers, side loading, or temporary accumulation is required. These conveyors have a maximum 2,000-pound live load.

Standard Specifications

• Widths: Up to 36″
• Lengths: Up to 100′
• Standard Speed: 60 FPM
• Standard Motor: 1/2 HP 230/460/3/60 TEFC
• Standard Drive: Bottom Mount at Infeed
• Standard Belt: 8″ Wide Black PVC 120
• Standard Supports: 30″ Top of Roller
• Drive Pulley: 8″ Dia Crown Face Rubber Lagged x 1-7/16″
• Discharge Pulley: 4″ Dia Crown Face Take Up x 1-3/16″
• Frame: 6-1/2″ Deep x 12 Gauge
• Bearings: Grease Sealed
• Standard Rollers: 2″ Dia x 16 ga. x 7/16″ Hex Shaft

This unit is used to convey heavier loads like loaded pallets, drums, and tires and is also used in applications that require a pop-up stop or push-off diverts.

Standard Specifications

• Widths: Up to 36″
• Lengths: Up to 40′
• Standard Speed: 60 FPM
• Standard Motor: 1/2 HP 230/460/3/60 TEFC
• Standard Drive: Bottom Mount at Infeed, Left Side
• Standard Belts: 8″ Wide Black PVC 120, Clipper Lacing
• Drive Pulley: 4″ Dia Crown Face Rubber Lagged x 1-3/16″
• Discharge Pulley: 4″ Dia Crown Face Take Up x 1-3/16″
• Frame: 6-1/2″ Deep x 12 Gauge
• Standard Rollers: 2″ Diameter x 16 ga. x 7/16″ Hex Shaft on 6″ Centers
• Standard Supports: 30″ Top of Roller

This lightweight shallow frame conveyor can be used in both horizontal and inclined applications. This unit includes a cleated belt and siderails making it the right choice for narrow, shorter run, inclined V-guided applications.

Standard Specifications

• Widths: 4″ – 24″
• Lengths: Up to 20′ (6″ Increments)
• Standard Length is 4′, Two Piece Bolt Together
• Standard Speed: 60 FPM
• Standard Motor: 1/3 HP 230/460/3/60 TEFC
• Standard Drive: Top Mount, Right Side
• Standard V Guided Belt: Black PVC 120 with 1-1/2″ High Cleats on 12″ Centers, Clipper Lacing
• Drive Pulley: 4″ Dia Flat Face Rubber Lagged x 1-3/16″
• A Section “V” Guided
• Infeed Pulley: 4″ Dia Crown Face Take Up x 1-3/16″
• Infeed Frame: 6-5/8″ Deep x 12 Gauge
• Others: Base unit includes 3-1/2″ High Side Rails and a Bottom Pan. Infeed Hoppers are Optional.