Independently programmable, airless lubrication for high‑precision stamping applications.
Overview — What This System Is
The PAX V‑Series Lubrication System is an advanced, airless spray solution engineered for stampers who need precise, programmable control over multiple lubrication points. Each spray line is independently controlled and can be timed to spray at different intervals and durations during the press cycle.
A diaphragm pump delivers filtered lubricant at pressures up to 100 psi, ensuring consistent delivery even with higher‑viscosity fluids. The system is designed to reduce lubricant waste, improve part quality, and extend tooling life — all while keeping the press area clean and free of overspray.
Features & Benefits
System Features
- Airless spray technology
- No air is mixed with the lubricant, resulting in better adhesion and dramatically reduced airborne mist.
- Independently programmable spray lines
- Each solenoid valve can be programmed to spray at different intervals and durations (minimum 20 ms).
- Supports a wide range of viscosities
- Standard systems handle fluids up to 100 SUS; higher viscosities can be accommodated with custom configurations.
- High‑pressure diaphragm pump
- Supplies filtered lubricant at up to 100 psi.
- No priming issues
- The system remains ready to run without manual priming.
- Low maintenance
- No dynamic seals, no airline lubrication, and no accumulators required.
Operational Benefits
- Reduces lubricant usage by over 50%
- Extends tooling life by reducing heat and friction
- Enables higher production speeds
- Improves part quality
- Keeps the press area clean — no overspray on the feeder, press frame, or floor
Applications
The PAX V-Series System is ideal for:
- Progressive dies
- Transfer dies
- High‑speed stamping
- Multi‑zone lubrication
- Dies requiring different lubrication timing at different stations
- Operations using water‑soluble lubricants or higher‑viscosity fluids
Models
1. V-Series Models with Reservoirs
- V5‑5
- V5‑15
- V10‑15
- V5‑30
- V10‑30
- V15‑30
Description
These systems include integrated reservoirs in 5, 15, or 30‑gallon capacities and come with 5, 10, or 15 independently programmable spray lines depending on the model.
Key Features
- Integrated reservoir
- Up to 15 spray lines
- Airless spray
- Programmable solenoid valves
- 115 VAC/60 Hz or 24 VDC operation
2. V‑Series Tankless Models
Models
Description
Tankless systems designed for:
- Central lubrication supply systems
- Direct drum‑feed lubrication
Options
- Optional diaphragm supply pump
- Optional filter assemblies
- Can be supplied without pump/filter for central systems
3. Model V5M
Description
A compact, 5‑line solenoid assembly designed for central lube system applications
Key Features
- 5 independently programmable solenoid valves
- Works with Pax control or customer‑supplied PLC
- Ideal for multi‑zone lubrication in centralized systems
4. V‑Series Dual Lube SystemsDescription
Allows the operator to select between two different lubricants, each stored in separate reservoirs.
Compatible Tankless Models
Selection Options
- Electronic valve
- Manual valve
Options & Accessories
Controller Interface (P/N 00‑1406‑21)
- PLC‑based control
- Full programming for each spray line
- Stores 112 jobs with password protection
- Manual mode for purging or cycling
- Full‑color operator interface
Power Cord & Plug
- 9‑foot cord
- 3‑prong plug
- For 115 V systems
Air Agitation
- Keeps water‑soluble lubricants in suspension
- Needle valve controls air flow into reservoir
Low‑Level Float
- Connects to press top‑stop circuit
- Prevents running dies dry
Automatic Refill System
Includes:
- Automatic refill solenoid valve
- Dual float switch assembly
- Low‑level float (optional)
Maintains reservoir level automatically when connected to a pressurized lubricant supply.
Reservoir Strainer
- Available for 5, 15, and 30‑gallon systems
- Prevents large particles from entering reservoir
Pressure Monitoring Sensors (PN 05‑1444‑30)
- Monitors pressure changes in each spray line
- Detects whether a line is spraying each cycle
- PNP‑type sensor with NO/NC outputs
- Includes 5‑meter M12 connector cable
V‑Series Spray Nozzles
- Standard nozzle assemblies
- Multiple spray tip patterns available
- Includes check valve, tip retainer, and nozzle body
Pre‑Pressurized Spray Assemblies
- Magnetic base assemblies
- Flextube assemblies
- Bracket‑mount assemblies
- Multi‑nozzle bracket systems
Spray Tips
Available in:
- Flat spray (25°–110°)
- Deflected spray
- Cone spray (various orifice sizes)
Fittings
Full range of:
- Swivel adapters
- Stackable manifolds
- Quick‑connect plugs
- Compression fittings
- Check valves
- Push‑to‑connect fittings
